CTA 7 Series Manual de usuario descargar pdf (Pagina 4)

Series CTA Cap Torque Testers

UNPACKING AND SETTING UP

1. Carefully unpack the CTA and check for any damage. Inspect the contents to

ensure that you have received a tester complete with all accessories – see

“List of included items” below.

2. Place the tester on a firm, flat and level working surface free from vibration. If

preferred, the CTA can be secured to a work bench with screws through the

four tapped holes in the underside of the base. Then fasten the sample grip-

ping posts into the desired holes on the sliders (see Fig. 1).

LIST OF INCLUDED ITEMS

CT001 flat jaws (optional)

These jaws are designed for use with square or

other shaped containers, in addition to round sam-

ples. The jaws are reversible; one side has a V-

groove, while the other side is flat. These jaws can

be mounted to the inside of the sliders, or the out-

side.

CT003 adjustable jaws (optional)

These jaws are designed for use with unique

shaped samples. The four gripping arms per jaw

may be independently repositioned in 45° incre-

ments to accommodate unique profiles. Loosen the

screw at the top of the jaw to separate the arms

and reposition as desired.

Quantity Item

1 Series CTA Torque Tester

1 User’s guide (this booklet)

4 Sample gripping posts

2 Sample gripping jaws (optional, see below)

1 AC adapter

1 Battery

1 Certificate of calibration

1 Carrying case (optional)

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

CTA 7 Series Manual de usuario Pagina 4